Speed Governor

Electric Control Speed Governor ESD5330 for Diesel Generator

Model: ESD5330
Origin: China
Warranty: 1 Year
In stock: Yes
Product description: The ESD5330 series speed control unit is rugged enough to be placed in a control cabinet or engine mounted enclosure with other dedicated control equipment.The circuit board is conformally coated to s
INQUIRY

Electric Control Speed governor ESD5330 for Diesel Generator

The ESD series governor are precise speed controls designed and manufactured in various configurations to meet application requirements using the latest analog and digital control technologies.

A wide variety of application needs can be satisfied with ESD series constant or variable speed governing, in isochronous or droop operation.

The ESD5330 series speed control unit is rugged enough to be placed in a control cabinet or engine mounted enclosure with other dedicated control equipment.The circuit board is conformally coated to seal out moisture and resist vibration.If water,mist or condensation can come in contact with the controller,it should be mounted vertically.This will allow any accumulated fluids to drain away from the speed control unit.

Input	Supply	24±20% VDC battery systems ( transient and reverse voltage Protected)
	Polarity	Negative Ground (Case Isolated)
	Power Consumption	100 MA (No Actuator current)
	Maximum Actuator Current	Internally limited to 9 A continuous
	Speed Sensor Signal	0.5-50 Volts RMS
Performance	Isochronous Operation/Steady State Stability	±0.25% or better
	Speed Range/Governor	1K to 7.5K Hz continuous
	Speed Drift with Temperature	±1 Max
	Idle Adjust CW	25-85% of rated speed
	Droop Range	Adjustable from 0-5% for a 1.5 A actuator current change
	Droop Adj. Max. (K-L Jumpered)	400 Hz.,±75Hz. Per 1.0A change
	Speed Trim Range	±200 Hz
	Remote Variable Speed Range	25 to 100% of rated speed
	Terminal Sensitivity H	-105 Hz,±15 Hz/Volt @ 5 K Impedance
	Terminal Sensitivity M	-130 Hz,±15 Hz/Volt @ 1 M Impedance
	Terminal Sensitivity K	-685 Hz,±40 Hz/Volt @ 225 K Impedance
	Terminal Sensitivity N	+1000 Hz,±50 Hz/Volt @ 8 K Impedance
Environmental	Ambient Operating Temperature Range	-40 to +85 Deg. C
	Relative Humidity	Up to 95%
	All Surface Finishes	Fungus Proof and Corrosion Resitant
Reliability	Vibration	1G at 20 to 100 Hz.
	Shock	10 G (11 ms)
	Testing	100% Functionally Tested